Back to all

On Board Diagnostics for Your Engine

August 2, 2020

Starting in 1996, Charlie's Fast Lube Poplar Bluff service technicians have been able to use a standardized diagnostic system to help determine what is wrong with a vehicle. This diagnostic system works in tandem with the Engine Control Modules for each vehicle's engine. The Engine Control Module is a computer that monitors and controls many engine functions.

Sensors throughout a vehicle send readings to the Engine Control Module. These readings help the computer make adjustments in various vehicle systems to allow for constantly changing driving conditions and even to compensate for minor problems. However, if the computer encounters a situation it can't adjust for, it turns on the Check Engine light. (The Check Engine light is called the “service engine soon” light on some vehicles.)

If the Check Engine light is burning steadily, it indicates a problem that needs to be taken care of soon. If it is flashing, however, the vehicle needs immediate attention at Charlie's Fast Lube Poplar Bluff. When the Check Engine light is flashing, the vehicle should not be driven at high speeds, haul heavy loads or tow a trailer. Poplar Bluff drivers need to understand that doing so can cause major damage.

When a vehicle is brought to Charlie's Fast Lube Poplar Bluff in Poplar Bluff because the Check Engine light is on, a technician will scan the Engine Control Module to learn why it turned the light on. The answer comes as a “trouble code.” The technician has access to software that allows him to enter the code and find out what it means. The software will also let your Charlie's Fast Lube Poplar Bluff technician know what might be causing the problem and how to diagnose it.

Notice that the trouble code does not tell your technician at Charlie's Fast Lube Poplar Bluff exactly what is wrong with the vehicle. It can only let him know where to start looking to find the problem.

Scanning a trouble code and determining what it means is fairly simple for the pros at Charlie's Fast Lube Poplar Bluff. But the ensuing process of actually diagnosing a vehicle's trouble can take a skilled technician some time. Sometimes this can add up to a significant repair bill. Some vehicle owners mistakenly believe  that the “trouble code” is all they need and think they can then fix their vehicles themselves. Some have tried to save money by purchasing an inexpensive scanner, or they take their vehicles to an auto parts store that offers the scan for little or no cost.

These options are often not the money-savers they seem for Poplar Bluff vehicle owners. They can end up costing the vehicle owner extra in unnecessary repairs and engine damage.

For example, the trouble code P0133 reads “Bank 1 sensor 1 circuit slow response.” Translated, that means the front oxygen sensor shows a slow response time in changing the mix of air to fuel. The seemingly obvious conclusion is that the sensor needs to be replaced. The vehicle owner purchases a sensor, installs it and happily goes on his way.

However, read the trouble again: a slow response time in changing the mix of air to fuel. Nowhere does this indicate that the sensor is bad. There are a lot of parts involved in changing the air-fuel mix, any of which could be causing a slow reaction time. Those include a bad or contaminated airflow sensor, an exhaust leak, a problem in the electrical system or a leak in the intake manifold. The sensor is merely relaying that the response time is slow; it doesn't indicate where the trouble is.

So the vehicle ends up with an oxygen sensor it did not need, and the delay in repairing the actual problem may have led to further damage to the engine. Both are added costs for the vehicle owner.

Cheap scanners also don't have the ability to read the history stored in an engine's computer. This operating history contains clues that can help in diagnosing engine trouble since it can indicate a developing problem. Charlie's Fast Lube Poplar Bluff invests a lot of money in high-end diagnostic equipment so that we have access not just to service codes but also to the operating history of the engine.

On-board diagnostics, then, are a tool to help diagnose what is wrong with a vehicle. They cannot specify what part needs to be fixed or replaced, and they cannot replace a well-trained and well-equipped service technician.

Unless you are a trained mechanic, it's good auto advice to use Charlie's Fast Lube Poplar Bluff for your car care. In the long run, it can save you time, unnecessary expense and frustration. Charlie's Fast Lube Poplar Bluff can also help you keep up with your scheduled preventive maintenance, which can also save you on repair bills by alerting you to potential problems before they get expensive.

Charlie's Fast Lube Poplar Bluff
2020 N. Westwood Blvd
Poplar Bluff, Missouri 63901
573-686-5585
http://www.charliesfastlubepoplarbluff.com

Need Service?

Request a Quote

More articles from Charlie's Fast Lube Poplar Bluff

Slipping into Fall (Driving with ABS Brakes)

April 14, 2024

As the weather changes over from hot to colder, drivers will have to deal with more slippery streets. And it's important to know how to drive with the brakes you have on your vehicle. In the 1970s, anti-lock braking systems (ABS) started to be installed on vehicles and they've been a game chang... More

Shifty Letters PRNDL (Transmission)

April 7, 2024

You probably figured out those shifty letters. They're what you see on your automatic transmission shifter and stand for Park, Reverse, Neutral, Drive and Low. Your automatic transmission is one of the great automotive inventions; here are some ways you can keep yours working well. Maintain you... More

Tracking True in Poplar Bluff: Wheel Alignment

March 31, 2024

At Charlie's Fast Lube Poplar Bluff, we occasionally see severe tire damage that could have been prevented with proper wheel alignment. During a Charlie's Fast Lube Poplar Bluff alignment service, your vehicle is put on an alignment rack where the tires, steering and suspension parts are inspect... More